Cabinet Heater and Controller

SK3110.000 Series of Electronic Thermostat


Product Description

Inner temperature controller for switchgear cabinet

Especially used for controlling fan filter, heater and exchanger. also could be monitoring the electric cabinetinner temperature when working as signal arcuser .


Technical Data

"Make bimetal sensor as heat sensitivity set to feedback of heat."

"Contact point scheme:single switch over contact point as instant switch component allowed load of contact point"

KL5-3  ACIO(4)A

DC=30W  KL5-4(Cooling)

AC5(4)DA DC=30W

(D)=Sensitivity load at COSφ=0.6

· Adjusting range:+50℃ to+60℃

· Weight:105gappr

· Size:70x70x33.5mm

· Switch discrepancy"1K±0.8K

· Voltage scope is wide,any type could be used from 24V of 230V

· Time-saving connection.terminal block could be installed with screw from outside

· Easy installation.could be installed to 35mm din rail vertically or horizontally.According to En50022.it could be clipped to NS/35-ES cabinet profile its accessory adapter.


Temperature regulation range: + 5 ℃ + 60 ℃

Weight: 105 G

Appearance size: 70 × 70 × 33.5mm


Drawing图纸.jpg






Share: